Deep drawing part
Material Type: DIN 6930-2/1108
Material thickness: T=1.0mm
Technological features: high stretching is easy to crack, and difficult to control the material thinning
Thick part
Material Type: S355MC / CR 420X
Material thickness: T=3.0~6.0mm
Technological features: round hole chamfering, R radius pier, full shear plane in the hole
High strength steel part
Material Type: JAH590A/SPFH780/SPC980/SAE1008/1180
Material thickness: T=1.5~3.2mm
Technological features: Large forming springback, easy to crack
Copper part
Material Type: C1020R-H
Material thickness: T=1.5mm
Process features: Bending and rebounding
Stainless Steel part
Material Type: SUS439MT
Material thickness: T=1.2mm
Product process: easy to crack when stretched, big rebound
Aluminum part
Material Type: AW 5754 /6061-T5 /AL-E-6060-180
Material thickness: T=2.0 /3.0 /4.0mm
Process features: easy to crack when forming, easy to scratch on the surface
In-die riveting
Material Type: S355MC
Material thickness: T=3.0mm
Process features: TOX riveting